1) WS-1C wet strength agent for papermaking is water-soluble, cationic and thermosetting resin with high cation density, strong fixation on fiber and obvious improvement of wet strength effect.
2) It has the advantages of high efficiency, suitable for neutral papermaking, easy recovery of damaged paper or waste paper, non-toxic and so on. Meet food hygiene requirements.
3) suitable for all kinds of wet strength paper. The product can be used as a wet strength agent, but also as a retention agent for emulsion rosin and reinforced rosin glue, a synergist of neutral sizing agent and cationic starch modifier.
1.Physical indexes of WS-1C
| WS-1C | |
| appearance | Light yellow to amber transparent liquid |
| Solid content | 12.5±0.5% |
| pH(25°C) | 3～7 |
| Viscosity (25 ° C) | 15～60cps |
2.Characteristics of WS-1C
1) WS-1C wet strength agent for papermaking is water-soluble, cationic and thermosetting resin with high cation density, strong fixation on fiber and obvious improvement of wet strength effect.
2) It has the advantages of high efficiency, suitable for neutral papermaking, easy recovery of damaged paper or waste paper, non-toxic and so on. Meet food hygiene requirements.
3) suitable for all kinds of wet strength paper. The product can be used as a wet strength agent, but also as a retention agent for emulsion rosin and reinforced rosin glue, a synergist of neutral sizing agent and cationic starch modifier.
3.Application method of WS-1C
When in use, dilute it with water for 10 times and then add it to the slurry tank or directly inject it into the slurry delivery pipe with a metering pump.
4.Packaging and storage
1)Packed in 50kg to one ton drums
2) The storage temperature is higher than 4.4 ℃ and lower than 32 ℃. If the product is frozen at low temperature, it can be melted and used immediately after mixing evenly.