Features of this product:
1) Suitable for systems with more fillers and high degree of closed circulation of white water;
2) Suitable for white cardboard and cultural paper with high pH and high temperature system;
3) The product has low monomer residue, and is also suitable for relevant paper types with environmental protection needs.
1. Physical indexes of HA-1
| HA-1 | |
| appearance | Yellow to light brown slightly turbid viscous liquid |
| Solid content | 20±1.0% |
| pH | 3.0～5.0 |
| Viscosity (25 ℃) | 2000～9000mPa.s |
2. Characteristics of HA-1
HA-1 is a new type of functional enhancer with high charge density due to the latest synthesis method of our company and the introduction of new monomers. The product has strong hydrolysis resistance under the condition of high pH, high conductivity, and can improve the paper strength on the basis of effectively maintaining water filtration and uniformity.
Features of this product:
1) Suitable for systems with more fillers and high degree of closed circulation of white water;
2) Suitable for white cardboard and cultural paper with high pH and high temperature system;
3) The product has low monomer residue, and is also suitable for relevant paper types with environmental protection needs.
3. Usage and precautions of HA-1
1) Please use clean water when diluting the product. Do not use unclean water such as white water. The dilution ratio is generally more than 15 times. It is recommended to use online dilution device for dissolution, dilution and addition. Before use, please ensure that the dilution process meets the addition requirements of our synergist. If the product of our company is used for the first time or the addition method needs to be changed due to production reasons, it is recommended to use it under the guidance of our technical service personnel.
2) The addition position shall be selected where it can be fully mixed with the slurry.
3) Please use FRP, PVC, PE and other plastics or stainless steel for the materials of product storage tank, dilution tank and piping. Iron products will corrode and increase the viscosity of the product. Do not use it.
4) Do not mix with other chemicals.
5) The storage period of the product is 3 months. For expired products, there may be quality degradation. Please pay attention.
As the product is acidic, please rinse it with tap water if it comes into contact with skin. In case of contact with eyes, rinse with tap water and ask a doctor for examination. If you drink by mistake, spit it out and send it to the hospital for examination.